Car Air Conditioning Valve Core R134A Quick Remover Installer Low Pressure Refrigerant Freon Adapter Kit To | Автомобили и

Car Air Conditioning Valve Core R134A Quick Remover Installer Low Pressure Refrigerant Freon Adapter Kit Valve Core Remover To This tool is a good replacement of the old valve core in the R134A connector of the car's air conditioner. The broken valve core can be removed through the use of this tool. In the process of removing, the refrigerant in the air conditioner will not leak as the valve lever on this tool is closed, and it is unnecessary to pour the new refrigerant into the air conditioner.
1. It is a set of 2 tools ( blue low side, red high side), 1/4 inch SAE valve core tool.
2. Adjustable cool gas quick joint.
3. Inclosed high side and low side coupler, the refrigerant will not leak.
4. The valve core puller is adjustable to fit the different valve core.
5. Don't need to release the refrigerant valve core changer for the replacement.
6. It is delicate, durable and strictly functional.
Specifications:
Color: red + blue
material: metal
High Side Coupler: Red
Low Side Coupler: Blue
Quick Joint: Air conditioning
Length: Approx.120 mm / 4.72 inch
Suitable For: R134a valve core
Usage:
At this point you should put the gloves and goggles on, and then you can replace the valve core(s) as described below.
1. Unscrew the low-side (or high-side if that is what you are fixing) port's cap
2. Connect the valve removal tool
3. Insert the extractor
4. Unscrew the old valve core
5. Pull the valve core up
6. Remove the valve core
7. The valve core is now out
8. Put the new valve core on the rod
9. Install the new valve core
10. Place the protective cap back on the low-side port
Package included:
1 x Blue Valve Core Remover Tool (Low Pressure Side)
1 x Red Valve Core Remover Tool (High Pressure Side)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.