43Pcs/Set 12V Car Charger Plug Glue-Gun Hail Removal Dent Repair Tool Puller Painless Remover |

43Pcs/Set 12V Car Charger Plug Glue-Gun Car Hail Removal Dent Repair Tool Dent Puller Car Painless Dent Repair Remover Repair

10pcs of dent and ding puller tab, replacement suckers in different shapes for multiple purposes.
Dent Remover Repair tool repairs the dents on your car.
Slide hammer is more powerful for paintless dent repair, conquer big dent.
Use widely for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc.
Weight:1850g
How to use the pdr tools ?
1. Clean damage surface with a clean wet cloth;
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;
3. Pull the trigger and apply the suitable drawing gasket with extruded glue(Note: The larger the drawing gasket is, the larger the drawing force is);
4.Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
6. When dent was removal, clear the glue by alcohol with plastic shovel;
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired.
Color: as shown
Material: metal + plastic
Bag Size:43x17x10cm
Package Contents:
1 * 2 in 1 puller
1 * 12V 20W Glue Gun
10 * Blue Tabs
10 * Red Tabs
1 * White Glue Sticks
5 * Black Glue Sticks
1 * Bridge puller with 6 tabs
2 * Shovels
1 * Towel
1 * Alcohol Bottle(Alcohol not included)
1 * English Manual
1 * Tools Bag
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.