4WD Outlet Universal Off-road Automatic Tire Brass Deflator Valve Adapter 6-30 PSI May06 |

4WD Outlet Universal Off-road Automatic Tire Brass Deflator Valve Adapter 6-30 PSI May06 |

Features:
No tools required
Can be used on any standard valve stem
Adjust tire pressure from 6 to 30psi. in 3psi increments
Easily disassembled to clean out sand or dirt
Simply thread onto stems and walk away
Manual start/stop valve built in
Made from 100% brass material to eliminate rust
Air immediately releases from tire once screwed on

Instruction:
Step 1: Deflate a spare/extra tire to your preferred deflation pressure
Step 2: With the lock ring and adjusting cap wound down, screw your deflator on the valve stem.(Be sure to make sure the threads are clean and in good condition)
Step 3: Loosen cap (counter-clockwise) until deflator pops open, then immediately tighten cap to the position where the air stops exhausting
Step 4: Turn lock ring up to adjust cap and tighten
Step 5: Installation is now complete and set to your preferred deflation pressure
NOTE:

When the tire pressure and the deflator setting within 8psi, a manual start may be required byfitting the deflator then lifting the center pin to start operation