Injection molding machine electronic ruler slider type KTF1250mm-2500mm linear displacement sensor warranty two years | Инструменты

Injection molding machine electronic ruler slider type KTF1250mm-2500mm linear displacement sensor warranty two years | Инструменты

ONSEIKO-KTF slider type product introduction: Range: (0-2500mm) other ranges need to be customized Features:     Rodless design     Ball joint structure avoids lateral loads     Up to 100 million times of service life under different application conditions     Excellent linearity up to ±0.05%     Resolution is higher than 0.01mm     High speed     Standard 4-pole plug and socket     Degree of protection IP 54 when installed face down         This series of sensors is primarily used for direct and accurate measurement of displacement and length in control, regulation and measurement systems. The rodless design allows the sensor to be brushed on the side of the sensor.    Moving along the length of the sensor, this avoids the sensor failure caused by the "pump" effect common in general sensors, and the stroke can reach 3000 mm.         The novel ball joint design allows the torque generated by the unevenness or tilt to be released and the sensor's tensile force to be uniform. The fixture can be fine-tuned. Based on materials    The relationship between the process and the process, the temperature coefficient of the sensor is extremely low. The rugged construction and materials allow the sensor to operate reliably under harsh temperature and vibration conditions. Sensor measurement    The principle is simple, passive and absolute output make it immune to external electromagnetic effects, and it does not require a built-in power supply to maintain real-time displacement data during power down. Application range: The KTF slider series is a miniaturization of the universal type of mounting, which is especially suitable for reducing the installation length of the mechanical length direction, and is suitable for large stroke type applications. Such as: large injection molding machine clamping stroke, rubber machine clamping stroke, woodworking machinery, hydraulic machinery, etc... Place of Origin: Shenzhen, China   Description: Shell: Anodized aluminum Slide block: plastic aluminum with embedded plastic Ball joint: coupling ball joint Hardened steel ball (303) and spring. M5 external thread Resistive component: conductive plastic Sliding brush assembly: precious metal multi-touch sliding brush with elastic damping Electronic connection: standard 4-pole socket Mounting card: 2 adjustable crimping clamps (standard)   4*16 with gasket hex socket screw 4 (standard) Mechanical connection 1 (standard) 1 fish ball pull (optional) Wiring plug 1 (standard)