10pcs TEC1 12706 Heatsink Thermoelectric Cooler Peltier Cool Plate Module 12V 6A | Бытовая техника

Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
These devices must be used in conjunction with a heat sink to avoid burned
Each device is full inspected and tested
Size: 40mm x 40mm x 3.8mm
Voltage : 12V
Umax (V) : 15V
Imax (A) : 4.3-4.6A
QMax (W) : 72W
Power Cord : 300mm
Net weight : 22g
Color : White
Installation:
Cooling piece is very simple to install and use.
Before installation, to find a dry cell, connected to the two leads of the cooler, obviously cold you can feel at one end and the other end of fever, remember that the polarity of the lead and determine a good cooler cold and hot end.
If you want to get a bigger system Ling, it is recommended that two cooling mode, with two stack up with the above, a grim absorption following a fever, the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support.
How to Use:
Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
Coated with silicone grease on both sides of the thermoelectric cooler.
Place the thermoelectric cooler on a heat sink with a potholder in the middle.
Tighten the screws.
Powered, and it starts cooling.
Package included:10x TEC1-12706 Thermoelectric Coolereel
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.