MCG-100W wood moisture analyzer content test solid floor tester | Инструменты

MCG-100W wood moisture analyzer, wood moisture content test, solid wood floor moisture content tester

A, MCG-100W induction type wood moisture meter _ wood moisture meter function chart

The operation method of two, MCG-100W induction type wood moisture meter _ moisture tester
1, press the ON button, power on, the screen digital flashing, stable display in the range of 0 + 0.3 (tree selection in one file). When the ON button is removed, the power is automatically cut off for about 60 seconds, enabling the battery to gain longer use time and self-protection.
Tip: after pressing the ON button several times, the wood moisture tester display is still digitally blurred or digital, and the 9V battery has been depleted. Replace the battery.
2, when the boot, the LCD screen does not show in the range of 0 + 0.3, please adjust the correction zero. The clockwise value is positive, and the inverse is negative.
3, due to the electromagnetic induction type MCG-100W wood moisture meter wave penetration depth is 30mm, so the measured wood thickness is less than 30mm, the board suspended measurement, or wood overlay measurement, overlay thickness of not less than 30mm.
4, when the adjustment tree species selection switch, the instrument's left correction knob can not make the display zero value, you can use a word carefully adjust the instrument right hole adjustment button, clockwise is positive, anti clockwise is negative.
Three, MCG-100W measurement of induction type wood moisture meter _ moisture tester
MCG-100W type wood moisture tester uses the Harris LSI technology to ensure the high sensitivity and accuracy of wood moisture measurement. Even with subtle changes in moisture content, the instrument can be represented. Therefore, it is a very accurate wood (wood fiber) moisture meter.
When using, please place the bottom of the instrument flat on the wood to be detected, the wood surface must be smooth, otherwise the measurement error will occur.
If the moisture content of the wood is not uniform, several points can be measured at the time of measurement and the average value is calculated to obtain the average moisture content.
Friendship tips:
1. The instrument shall be measured in the direction of the wood fiber.
2, the wood surface should be smooth.
3, the wood moisture tester in the instrument at the bottom of the box (built-in), size: 45mm long, 44mm wide. Therefore, the surface of the wood to be tested is greater than the surface of the sensor.
4, wood, wood powder and wood debris can not be detected around other objects, such as iron, with magnetic induction. Otherwise, the measurement result is inaccurate.
When measuring wood flour and wood shavings, 1 gears are usually chosen.
5, the instrument electromagnetic wave penetration depth is 30mm, so it was detected wood, wood powder thickness is less than 30mm, should be suspended measurement or superposition to at least 30mm. Otherwise, the moisture of the electromagnetic wave scanning to the ground will affect the measurement results.
Four, MCG-100W induction type wood moisture meter _ moisture tester technical parameters
1, measuring range: 0~50%
2, resolution: 0.1%
3, display: 3 integrant LCD liquid crystal display
4, electromagnetic wave scanning depth: 30mm
5, species stalls: 6 stalls
6, power: 9V (6F22) battery section
7, working environment: -5 degrees ~50 DEG C, relative humidity <80%
8, accuracy: + 0.5%
9, size, weight: 125mm * 65mm * 31.5mm, 150g

 

Five, MCG-100W induction type wood moisture meter _ wood moisture tester warranty
1. This product is guaranteed for one year from the date of purchase.
2, man-made damage or unauthorized users to disassemble the warranty.