Электрическая штамповка 160A двойная головка металлическая машина для резки

Электрическая штамповка 160A двойная головка металлическая машина для резки

Description:
1 It is especially important to cut the aluminum plate at the blade edge.
2 Open the drill first, then cut it. At the end, first exit and then turn off the drill.
3 The cutting edge of the shank must be perpendicular to the workpiece to be cut during cutting to prevent the shank from breaking.
4 Tool bar replacement: Open the cover, take out the anti-loose nut, loosen the set screw, pull out the tool bar with pliers, reinstall the knife bar, and tighten the screw.
5 Tool holder replacement: Unscrew the compression cap counterclockwise and replace it with a new one.

Specification:
Color: silver
Material: Material: Alloy Stee
Size: 100*240mm
Allow cutting thickness
Ordinary iron plate: 1.8mm
Stainless steel plate: 1.2mm
Copper, aluminum plate: 2mm
Plastic plywood car: 2mm

Package include:
1x  cutter
1x  plastic handle
1x cutter stick
1x hex wrentch

Notes:
Please allow slight dimension difference due to different manual measurement
Due to the difference between different monitors, the picture may not reflect the actual color of the item We guarantee the style is the same as shown in the pictures .