5V 125KHz RFID Embedded Reader Module With Switch Signal Output 50 Users | Безопасность и защита

5V 125KHz RFID Embedded Reader Module With Switch Signal Output 50 Users | Безопасность и защита

      This module is a multi-functional intelligent card reader control module. It has far exceeded the function of “reading card module”. It is characterized by intelligent devices and RF circuits. It has 4 functions: RF-sensitive card reading + card issuing and Registration management + identification and auditing + control output. Since the intelligent module and the user card use the two-way authentication mechanism, the card that is not registered by the management card into the intelligent module is a non-transmitted user card, and cannot enter at all, so the intelligent module Security and confidentiality are quite good. This module is a safe, reliable, low-cost, and easy-to-use intelligent module. It requires almost no secondary development and requires only a small number of external devices to form a practical system. Users and developers do not need to understand RF identification technology, just understand the basic pin function of this module, that is, can quickly develop and mass produce ultra-low-cost, finished applications of various applications with RF card management and control functions. This module can also be embedded in its existing equipment for easy RF management and control.

Typical application case

RF induction lock, electric lock control, such as security door, password box, safe, etc.;

Can assemble the access control system, personnel, vehicle access control, etc.; ^

Equipment management of home or business, such as public self-service equipment, identity control of elevator users, electric cabinets, electrical appliances, etc., where power is limited. ^

Any other device that requires identification and control.

Operating voltage: 5V, current: <50mA

Support card type: 125KHZ EM001/4102 or compatible EMID card

Card reading distance <100mm, reading card time <0. 5 seconds

management card and 50 user cards can be set^

When the authorized user card is authorized, the switch signal output, drive the load or relay, such as the lock electrical switch, etc.;

1,GND

2,VCC, 5V

3,K, Setup Key

4,Led

5,LS, beep sound out

6,Out, Switch Signal Output

7,L1, antenna

8,L2, antenna