Ethernet Adapter for Omron PLC Programming Isolated RS232 to RJ45. Modbus TCP Multi Master | Инструменты

 

EthernetModule for PLC, Din rail Mounting

 FS-ETH-OMR is an industrial-grade serial-to-Ethernet adapter for OMRON PLC (RS232 interface using PLC). The user can implement the following functions through parameter configuration:

Ordinary serial to Ethernet server, support TCP or UDP, to achieve serial and network port data transparent transmission.MODBUSTCP / RTU standard gateway, to achieve MODBUSTCP protocol and RTU protocol bi-directional conversion.Multi-master shared serial server, to achieve multiple master station at the same time real-time monitoring of a PLC or a serial bus on multiple PLC.Can be through the local area network or the Internet to achieve remote upload PLC, download program data and monitor PLC. In the case of

Features:

 

Using time-division technology to support up to 96 main stations at the same time access to a serial device or a bus on a number of serial devices to support multi-host while collecting data and control PLC. In a typical query system, you can achieve A master station for on-site monitoring, B master station for central monitoring, C master station to collect data to the database ... ...Applicable to the query RS485 / 232/422 system (also known as polling, answering system), typically such as MODBUS system.Provide virtual serial port driver software, to achieve the existing system seamless upgrade, enhance the control level and grade.Support transparent TCP / IP direct connection and MODBUSTCP / RTU protocol two-way conversion, fully support all kinds of configuration software.Can achieve multi-host hot standby operation. Multiple computers can run exactly the same or different acquisition monitoring software, and does not affect the software control. If a computer is paralyzed, other computers will be able to continue to work without any impact, doubling the system reliability.With a strong network fault detection and automatic reconnection mechanism.Industrial design, with a strong anti-interference ability, serial and network port isolation.Miniaturized design, the shape of the volume is less than a pack of cigarettes, DIN35mm standard rail installation.

 

Parameter classification

Project

Indicators

 

Network port parameters

Port type

RJ45 socket with LED indicator.

rate

10 / 100Mbps adaptive.

Isolation protection

Built-in isolation transformer, isolation voltage 1500V.

Maximum transmission distance

100 meters, automatically adapt to the straight line and cross cable.

 

 

 

Serial port parameters

Port type

RS232 interface, DB9M plug straight Omron PLC RS232 communication port.

 

 

Communication parameters

Baud rate: 1200bps-115200bps.

Data bits: 5/6/7/8.

Check digit: None / Odd / Even / Mark / Space.

Stop bit: 1/2

Flow control: no flow control, CTS / RTS, XON / XOFF.

Interface protection

RS232 interface surge protection and 15kVESD protection.

 

 

 

 

 

 

Software parameters

Ethernet protocol

TCP, UDP, IP, DNS and other standard TCP / IP protocol.

Industrial communication protocol

MODBUSTCP / RTU standard gateway.

 

 

 

Operating mode

TCP Client

TCP Server

UDP

MODBUSTCP_Master-MODBUSRTU_Slaver

MODBUSRTU_Master-MODBUSTCP_Slaver

Multi-master mode, supports up to 96 masters.

Single master mode.

Parameter configuration mode

Web browser.

communication method

Socket, virtual serial port.

 

 

General parameters

Working voltage and power consumption

Voltage DC5V, power consumption 1W, by the PLC programming communication port power supply, no need to follow.

Interface isolation

The serial port and the network port are isolated from each other, and the isolation voltage is 1500V.

Operating temperature

-40 ° ~ + 85 °.

Dimensions

65mm × 51mm × 26mm (length × width × height).

weight

90 grams.

Installation method

DIN35mm standard rail mounting.