24V DC Brushless Stainless Steel Solar Submersible Water pump S242T-40 3'' 2m3/h 40m Head for PV Pumping System | Обустройство

24V DC Brushless Stainless Steel Solar Submersible Water pump S242T-40 3'' 2m3/h 40m Head for PV Pumping System | Обустройство

Model: S242T-40

Packing list

1PCS    Water pump(25mm outlet)

5meters  Pure copper wire

Note:    We can make longer copper wire according to the customer requirements.

Product Features:

1. Wide working voltage:18v-45v.

2. Built-in MPPT controller which can make the best use of solar energy.

3. Over-voltage protection / Under-voltage protection: The pump will stop working automatically when the voltage is too high or too low; Then it will detect the voltage every 10 minutes, and it will start to work automatically when the voltage is between 18v-45v.

4. The pump can be directly connected to solar panels without battery in sunshine.

Service:

Free system design support service.

1 years free warranty.

Parameters

Model naming rules:

                     S24  2T  -  40

                       a   b      c

Model Description:

a: Voltage:24v       b: Max Flow rate:2T/H(2m3/H)       c:Head:40m

Working voltage range: 18v-45v                      Max head: 45m

Technical parameters

Voltage: DC 24v;     Head: 40m;     Flow rate: 2M3/H;      Power: 284w

Intake: 76mm;       Outlet:25mm    Rotation speed:3500r/m  Protection class:IP68  

Application

Solar Modules

The 12v solar water pump system are recommended to be powered by 18v Monocrystalline / Polycrystalline solar panels in parallel connection; The 24v solar water pump system are recommended to be powered by 36v Monocrystalline / Polycrystalline solar panels in parallel connection.

Installations

2. If you also need the pump to work during the night time, or even in cloudy and rainy day, you also need controller and battery.

Note:

1. Do not mix the positive (+) and negative (-) connection.

2. Do not operate for long time when there is no water in the pump

3. The pump is submersible pump, it must be full submerged in the water.

4. Copper wire required. ( PS: 6 mm² or 10 mm² copper wire is required when the cable length is too long.)

5. The diameter of the pipe connected to the pump must bigger than 1 inch. Don’t block or bend the pipe/ inake/ outlet. Damage caused by the above is not covered by the warranty.