2014 New Pro 3000 RPM Electric Nail Art Drill Manicure Set File Improved Overheat + Vibration US/EU Plug 10 | Красота и здоровье

Plug in the electric cord of the transformer to the main electric outlet

Turn on the on/off switch on the transformer. (machine should be at the lowest speed when turning on)

Select the desired speed by turning the variable speed control knob on the transformer

The black switch in front of the transformer, next to the speed control selection knob is for forward and reverse rotation direction

To use the foot pedal control, connect the end of the cord from the foot pedal to the out put hole at the front of the transformer and press down on the foot pedal

To secure the bits: push in the desired bit firmly into the hole at the rotating head of the hand piece until the second lock click. (please note the bit has to pass through)

To remove the bits: turn off the machine and gently pull the bit out.

Always unplug the tool when you change accessory or collets

Do not engage the shaft lock button while the tool is running

Do not use near or place in water. if motor falls into water, unplug immediately. do not reach into water

Do not touch the bit after use. The bit is too hot to be touched by bare hands

Keep dust out of eyes and lungs by using protective eyewear or a dust mask

Always unplug it after use

When the machine is not in use, all tool must be stored in a dry location abd keep out of reach of children.

1 x Electric Nail Drill Machine : Main control + Handpiece

1 x Table Stand for handpiece

1 x Foot Pedal Power Control

30 x Electric Nail File Drill Bits (With 3/32" (2.35mm) shank size)

6 x Optional Bits / Filing Heads (includes 1pc of emery rod with 4 sanding bands)

50 pieces of Sanding Bands with degree 80"

50 pieces of Sanding Bands with degree 100"