3.5 inch CCTV tester monitor analog CVBS Ping testing cable tracer POE PTZ UTP test TDR function 12V | Безопасность и защита

3.5 inch CCTV tester monitor analog CVBS Ping testing cable tracer POE PTZ UTP test TDR function 12V | Безопасность и защита

Model: HVT-2602T  CCTV security camera tester monitor  cable tracer TDR IP address POE  ping testing

NOTE: It can not test ip camera video, only test ip address! It has battery and almost 2kg.

HVT-2602T VI generation
3.5 inch full-view TFT-LCD
/PTZ controller/Colorbar generator
/UTP cable test/TDR test
The new CCTV tester is developed for the On-Site installation and maintenance of IP camera, analog camera and network device, with Video display, PTZ control, DC12v output power, Audio test, Color bar generator, RS 485 Data searching and Cable testing, which are the same to the previous models. The new developed functions include POE power supply testing,PINGtesting, IP address scan, Cable scan, Video snapshot, Video record, Image magnification, Port flicker, LED lamp etc. The new tester also has built in TDR cable testing, which is specialized designed for BNC cable testing in the security monitoring system. This function can accurately measure BNC cable and network cable’s break point and short-circuit location. The new tester designed with easy operation and portability makes it simple for a cctv technician or installer to install and maintain CCTV systems, improving work efficiency by reducing time in the field.

Applications:

—Find out the other end of the cable in security maintenance and network engineering
—CCTV system installation and maintenance

—Dome camera and All in one camera testing
—The CCTV transmitting channel testing
—PTZ controller

Features:

—3.5 inch full-view TFT-LCD, 480(RGB)x320NEW
—low consumption, work for 11 hours
—OSD menu, English, Chinese and other languages optional
—LCD screen brightness/contrast/color Saturation adjustable
—Cable scan, send the specific signal, easy to find the connected cable.NEW
—Automatically identify and adapt the video mode of NTSC and PAL
—Enhanced colorbar generator, by receiving the video color bar to test the video channel whether transmit normallyNEW
—MoveableMicroSDNEW
—LED Lamp, easy to operate at night
—User-defined shortcut keys F1 and F2 NEW
—10x zoom,video image can be magnified to view the details, easy to useNEW
—Snapshotand save the current image as JPG filein the SD cardNEW
—PING testing, test IP camera or other network devices’ ethernet port whether work normally, and the IP address whether is rightNEW
—IP address scan, quickly search the IP address for the connected IP camera and other network devicesNEW
—POE voltage measurement, test the POE switch’s voltage to IP cameras, wireless AP device and other PD devicesNEW
—DevicePortflicker, easy to find the connected POE switch port by sending special signals, the connected POE port will flicker at special frequencyNEW
—Link monitor; check the setting IP address whether occupiedNEW
—TDR break point and short – circuit measurement( BNC cable, network cable etc)NEW
—PTZ address scan, search up the ID of PTZ camera.
—Network cable and Telephone cable testing, display the sequence of connection and the No
of the LAN cable
—Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D,
SAMSUNG
—Support RS232/RS485/RS422, rate 600-115200bps adjustable
—Lithium Ion PolymerBattery. The device employs advanced power control and protection circuit
—Display the data and image in on the screen at the same time
—Easy for use that the train is almost unnecessary

Function:

1.Video signal testing
²The new cctv tester, built-in high definition 3.5”LCD-TFT 480 (RGB) x320
full-view display screen, easy and directly displays the camera image quality
²Support PAL/NTSC
²LCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work

2. Video signalleveltest
Testvideo signal strengthattenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image.
It also can real-display the video level value, if out of range, notices will be display in the screen.

3.PTZ controller
Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.

4.Enhanced Color bar generator
Video Generating, the PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful imagines). By receiving the video color bar to test the video channel whether transmit normally. And judge whether the color is different, because of the transmission loss or interference, it suitable for Video transmission of the field tests, such asoptical video transmitter and receiver, video cable etc.
The new function color bar can test the image whether shift.
The color bar (red, green, blue, white, black) test the monitor whether have white or black dot etc.

5.DC12V 1A output power
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.

6.Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

7.Cable tester
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.

8.PTZ controller
Search the Control protocol code from Multifunction keyboard or DVR by RS485 /RS232 interface, test the PTZ control command data whether received anomaly and RS485/RS232 data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P:A0 00(Add)xx xxxxxx AF xx
PELCO-D:FF 01(Add)xx xxxxxxxx

9.PTZ address scanning
Search up the ID of PTZ camera. Help the engineer search the speed dome address quickly.

10.Image magnification(10xZoom)
Set image 10x zoom, can view and display the details by 1x.2x.3x.4x.5x.6x - 10X zoom in the monitor and tester.

11.Video snapshot
Capture the video image and save the current video frames as JPEG file

12.Videorecord
Record and save the current video in the SD card

13.Video playback
Video image and record files are saved in the SD card. Storage file directory can be created according to the date

14.Portflicker
The tester will send special signals to make the connected POE port flicker at special frequency, which will enable the installers to easily and quickly find the connected ethernet cable. This function can prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network connection.

15.IP address scan
In digital IP surveillance applications, if IP camera’s IP address is not clear or forgotten; the device cannot be used .
IP address scan can quickly search the connected IP camera or other network device’s IP address.

16.Link monitor
To add an IP camera or other network device to the current network group, the new IP address must not be occupied, otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can check if the new setting IP address is occupied.

17.PINGtest
PINGis the most conventional network debugging tools; It is used for testing if the connected IP camera or other network equipment’s ethernet port is working normally and the IP address is correct.

18.POE tester
It can test the PoE voltage when the POE switch is supplying the POE power to IP camera. It can clearly display the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.

19.LED lamp
It is useful for the Engineer to install and maintain security system at night. LED On/Off pressing button, easy operation.

20.F1 F2User-definedshortcut keys
The user-defined shortcut key is designed for improving the efficiency for the engineer, anytime press, easy to operate.

21.TDR Break-point and short-circuit measurement (optional function refer to the last page)
New function: TDR cable testing, accurately measure BNC cable, network cable, control cable break-point and short-circuits location. It improves working efficiency.

22.Cablescan
Send the specific signal, easy to find the connected cable.

Specifications

Model
CCTV TESTER
HVT-2602T( 6th generation)
Video Test
Signal mode
NTSC/PAL (Auto adapt)
Display
3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
LCD adjustment
Brightness, Contrast, Saturation adjustable
Video IN/OUT
1 channel BNC Input & 1 channel Output
Video Output Mode
1.0 Vp-p
Video Level test
Level test
Video signals measured in IRE or mV
PTZ controller
Communication
Support RS232 and RS485
PTZ Protocol
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate
600,1200,2400,4800,9600,19200,57600,115200bps
VideoSignal Generation
Color bar generator
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP CABLE TEST
UTP cable test
Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output
Output DC12V1A power for camera
Audio input test
Audio input test
test the pickup and other audio equipments on the front-end
RS485 data analysis
Data Monitor
Captures and analyzes the command data from controlling device
10 x zoom of image
Image 10x zoom
10x zoom image display and video out
Photograph,Videorecord, Record playback
Photograph
snapshot and save the current image as JPG file
Video record
Video record and storage the file
Record playback
To view the storage file in the SD card
Port flicker

Port flicker

Find the connected POE port quickly.
IP scan, Link monitor,PINGtest
IP scan
Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor
Check the IP address whether is occupied
PINGtesting
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan
Cable scan
Search the cable by the audio signal
POE tester
POE tester
Display the power supply voltage and cable connection states
TDR Tester
Only for T model
TDR Tester
breakpoint and short circuit measurement(BNC cable, telephone cable)
POWER
Power Adapter
DC 5V(1.5A)
Battery
Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable
After charging 3-4 hour, working time lasts 11 hours
Low Consumption
Energy saving technology, the battery icon real-time display
Parameter
Operation setting
English/Chinese and other languages OSD menu
Auto off
5-60 (mins)
Keytone
On/Off
General
Working Temperature
-10degree---+50degree
Working Humidity
30%-90%
Dimension/Weight
194mm x 112mm x 48mm / 540g